Empire Sheath Column V-neck Straps Chapel Train Chiffon V-back Draped Wedding Dress
|Terms of Trade:||CFR,CIF|
|Min. Order:||4000 Cubic Meter|
|Delivery Time:||30 Days|
|Place of Origin:||yangjiang|
Model No.: HS-WD-1773
Portable air to water mini chiller with cooling capacity: 20kW, 25kW, 30kW, 35kW, 40kW and 50kW. With hydrophilic modular, including water tank and water pump below 30 kW, if above 30 kW, the water pump and water tank will be outside the air conditioner unit. The air to water mini chiller including top discharge air cooled chiller and side discharge air cooled chiller. This type air cooled water chiller with world famous brand components, such as COPELAND / DANFOSS brand compressor, SCHNEIDER electric parts, EMERSON refrigerant valves etc.
● Small Offices, Hotels, Hospitals
● Small commercial and residential buildings
Why this choice?
● Very high efficiency with R410A
● Very low noise operation
● R410A scroll compressors
● Advanced control
● Unit with pump and optional buffer tank
● Very compact for outdoor or indoor installation
01. Structure. Panels and base frame are made from galvanized steel protected with polyester powder painting to ensure total resistance to atmospheric agents.
02. Compressor. Hermetic scroll type compressor, equipped with the crankcase heater and thermal protection with thermal overload cut-out and crankcase heater mounted on rubber vibration isolators.
03. Axial fan. External rotor type axial fans, equipped with single phase direct drive motors, low noise 6 poles, protection level IP54, provided with a protective outlet grille.
04. Evaporator. High efficiency and low pressure drop stainless steel (AISI 316) water exchangers, with antifreeze heating element (option) and differential
pressure switch, factory insulated with flexible close cell material.
05. Condenser. Coils are consisting of seamless copper tubes mechanically expanded into blue hydrophilic aluminum fins,100% fully quality tested; sub
cooling circuit to prevent freezing at the base (optional); protected with metal grill.
06. Desuperheater. High efficiency stainless steel brazed plate heat exchanger, factory insulated with flexible close cell material(optional).
07. Refrigerant circuit. Copper tube connection with charge valve, filter, sight glass, gas liquid separator, thermostatic expansion valve, low pressure switch with automatic reset, high pressure switch with manual reset . The heat pump system unit is completed also with 4-way valve, liquid receiver and one way valve.
08. Water circuit. Built with air vent valve, water drain connection, and female-threaded hydraulic connectors Water pump (8kW-30kW), differential pressure switch Expansion tank (8kW-30kW).
09. Electric panel
Compressor protection breaker
Fan motor protection breaker
Control circuit protection breaker
Phase sequence relay (only for 3-phase)
Programmable microprocessor controller
Additional electric heater embedded in the coils for defrosting in low temperature ambient. It must be factory installed.
Stainless steel covering
Tube in tube heat exchanger
Water circuit electric heater
Technical Data of Water Chiller
|Cooling input (without water pump)||kW||8.2||9.03||9.39||13.2||15.02||18.8|
|Heating input (without water pump)||kW||8.7||9.23||9.43||14.3||15.57||20.45|
|Water side pressure drop||kPa||38||39||42||50||52||52|
|Water connection size||mm||DN40||DN40||DN40||DN40||DN40||DN40|
|Noise level ***||dB(A)||66||66||68||70||70||70|
** Ambient temperature 7ºC; user side water in/out 40/45ºC.
*** Sound pressure measured at a distance of 1 m and a height of 1.5 m above the ground in an ideal field (fan side).
Bossgoo Wedding Company Co., Ltd.
Tom Spa Beauty Salon Equipment Co., Ltd. engages in developing and manufacturing barber and beauty chairs, beds and other products. Relying on its strong technical force and advanced equipment, the perspicacious company aims at the international and domestic barber and beauty chair and bed market. Provided with a group of experienced designers, the company has been constantly improving the product quality, and developed many new ergonomics-based products, including barber chairs, facial chairs, shampoo chairs, beauty chairs, massage chairs, massage beds, etc. The development idea of each product comes from the users; each product is comfortable and durable, which reflects the high-tech quality and strict quality assurance of Tom; and each product has been well received since entering market for its noble and unique style and exquisite workmanship. Following the [people-oriented" design concept and relying on the advanced production technology and a flow of new designs, the company has been in the forefront of the barber and beauty equipment industry. By the use of its one-stop topping services and first-class quality, Tom has interpreted for the users in modern life that [high quality creates high-taste life".
- Company Name: Bossgoo Wedding Company Co., Ltd.
- Representative: asd
- Product/Service: Facial Bed , Massage Table , Dreaming Wedding , Pedicure Chair , Lang Dress , Short Blue Dress
- Capital (Million US $): 10 Million
- Total Annual Sales Volume (Million US $): Below US$1 Million
- Export Percentage: 1% - 10%
- Total Annual Purchase Volume (Million US $): US$1 Million - US$2.5 Million
- No. of Production Lines: 8
- Factory Location: NO.351,xiangyang road,shigu,tangxia town
- Contact Person: Mr. Lee
- Tel: 86-28556016
Premium Related Products