Injection molding machine servo motor 380ton
Basic Info
Model No.: BN-380S
Product Description
Injection molding machine servo motor 380ton
Main Features:
Brand new servo hydraulic system design: servo motors make the synchronization of melting and pressure holding possible.
Synchronized melting: All of the time except injection could be used for PP/PE material melting to save time.
Synchronized pressure holding: After injection, the system start pressure holding and material melting at the same time to save energy.
Advantage of Servo Control:
Low power consumption: When the machine is cooling or without any movement, the servo speed is less than 10 RPM which the energy consumption is almost 0. While normal electrical motor speed around 1500RPM. The output point of servo hydraulic oil directly connected with the directional valve who control the movement to save energy. While normal machine has to though flow control valve.
Precision: Pressure sensor make the accuracy of servo hydraulic system reach 0.1bar.
Fast react: It only takes 0.12s for the pressure and speed to reach maximum output
Here is our model BN-380S injection molding machine which is suitable for different types of plastic products such as dust bins,storage boxes ...
We hope to offer you best solution for your products.
Clamping system:
-We adopt five fulctum hyperbolic elbow clamping mechnical which can tansfer power effectively and ensure the prcess of high speed response
-Low pressure mold protection system
-Tie bar adopts surface hard chromium plating processing
-Mould platen bottom support use copper material which can protect steel belt
-Automatic centerial lubricarion system which is easy for after service
Injection system:
-Optimization design of the injection unit to provide higher accuracy,ensure the higher stability
-Injection parts adopt double guide tie bars which improve inject technology
-Injection,holding pressure closed-loop control and precision back pressure control
-Cylinder temperature time monitoring to ensure high quality molding requirements.
Electric system:
-The advanced injection plastic machine computer work stable and accurate
-Intelligent method of defects in the course of injection process parameters
-It can save more than one hundred program
-It is equipped with mechanical arm eletrical interface which can be used to match the special mechanical arms for the injection robot.
Hydraulic system:
-Dual proportion load induction oil circuit is used to get steady operation,energy consumption variable with load and energy saving
-The oil box volume is large and the cooling system is arranged properly, it can reduc the oil efficiently
-High function oil pump,liquid motor, seal element can snsure low noise and zero penetration.
-All adopt international well-know hydraulic components
Technical parameters:
BN-380S INJECTION PART
PARTE INYECCIÓN UNIT A B C Screw diameter
Diámetro del tornillo mm 65 70 75 Screw L/D ratio
Tasa L/D del tornillo L/D 22 20.3 18.8 Shot volume
Volumen de Inyección cm3 1177 1366 1568 Injection weight(PS)
Peso de la inyección g 1071 1243 1426 oz 37.8 43.8 50.3 Injection rate
Tasa de inyección cm3/ s 320.1 371.2 426.1 Injection pressure
Presión de inyección Mpa 208 180 156.8 Screw speed
Velocidad del tornillo rpm 150 CLAMPING PART
PARTE DE CIERRE Clamping force
Fuerza de cierre kN 3800 Opening stroke
Apertura mm 680 Space between tie bars
Espacio entre barras mm 730X670 Mould thickness
Espesor de molde mm 250~680 Ejector stroke
Carrera del expulsor mm 180 Ejector force
Fuerza del expulsor kN 62 OTHERS
Otros Oil pump pressure
Presión de la bomba de aceite Mpa 16 Oil pump motor power
Potencia del motor de la bomba de aceite kW 39.4 Heater power
Potencia del calefactor kW 23 Machine dimension
Dimensión de la máquina m 7.2×1.9×2.4 Oil tank capacity
Capacidad del tanque de aceite L 580 Machine Weight
Peso de la máquina t 15.5
Processing photos:
Welcome for your inquiry.
Product Categories : Servo Motor Injection Molding Machine